Screenshot Guide: Install Ubuntu Server 16.04 LTS Xenial Xerus

Ubuntu 16.04 LTS Xenial Xerus, the next iteration of Ubuntu will be here shortly and we want to get you started by showing how to install Ubuntu Server 16.04 LTS Xenial Xerus. I strongly recommend LTS (Long Term Support) releases for Ubuntu based home server setup for stability and support reasons. Two years back I published Ubuntu Server setup guide for 14.04 LTS Trusty Tahr. I followed it by publishing a series of Ubuntu Home Server guides. This step-by-step screenshot guide will show you how to install Ubuntu 16.04 Server edition. If you do not have patience to read the text guide, there is a video guide on the 3rd page.

Install Ubuntu Server 16.04 LTS Xenial Xerus

Some of you may know that I run an energy efficient Ubuntu home server that also doubles as a Ubuntu Home media server with 14.04 LTS release. [Read: 5 Most common NAS or Home Server uses]

Recommended HTPC / Home Server Builds:

Note that Trusty Tahr 14.04 is still good for 3 more years with security updates and there is no real need to upgrade. If for some reason you want to or are starting from scratch follow this Ubuntu Server 16.04 setup guide.

To install Ubuntu Server 16.04, first download the Ubuntu 16.04 Server iso file and create a bootable USB. If you do not know how to do this, refer to my guide on installing Ubuntu Server from USB. Once you have the bootable USB ready, pop it in and make your system boot from USB (this has to be done through the System BIOS or UEFI).

Step 1: Select Ubuntu Installer Language

First select the Ubuntu installer language to use.

Installer Language
Install Ubuntu 16.04 Server - Installer Language

Step 2: Install Ubuntu Server 16.04

Click on Install Ubuntu Server to continue. For normal installations, you do not have to mess with any of the advanced options.

Setup Ubuntu Server Xenial Xerus - Start
2. Start Ubuntu Server Installation

Step 3: Select Operating System Language

Next select the language for your Ubuntu server operating system.

Setup Ubuntu Home Server 16.04 - Os Language
3. Os Language

Step 4: Select Server Location

Select your servers location. This helps in determining timezone.

Install Ubuntu Home Server - Location
4. Server Location

Step 5: Keyboard Detection

Nothing to explain here. Unless you are using a special keyboard, you may skip keyboard detection.

Setup Ubuntu Home Server - Detect Keyboard
5. Detect Keyboard

Step 6: Network configuration

Installer, in most home application cases automatically configures the network. Your server will automatically get its network IP from your DHCP server (typically your router). If you are on a Wifi network, you may need to configure it manually.

Install Ubuntu Home Server - Network Configuration
6. Network Configuration

Step 7: Hostname

A hostname is used to refer to your server (your server's nick name). You may provide any name here. My recommendation is to pick something short, easy to remember, and without a space or special characters.

Install Ubuntu Server Nas - Hostname
7. Ubuntu Server Hostname

Step 8: Server User Fullname

Next, provide a Fullname for the primary account. This is not the root (administrator) user but this user can temporarily gain admin privileges using the sudo command.

Install Ubuntu Server 1604 User Fullname
8. Set User Fullname

Step 9: Server Username

Then provide the login username for the primary account.

Install Ubuntu Server 16.04 - Username
9. Set Username

Step 10: Server Password

Select a password for the user created above. You will have to re-enter the password to confirm.

Install Ubuntu Home Server - Password
10. Set Password

Make sure you set an easy to remember but strong password with a mix of upper case letters, lower case letters, numbers, and special characters.

Step 11: Home Directory Encryption

Generally speaking, you do not have to encrypt your home directory. But you may do so if you want to.

Install Ubuntu Server Xenial Xerus - Encryption
11. Ubuntu Server Encryption

Step 12: Confirm Timezone

The installer should automatically pick your timezone. Confirm the choice and move forward.

Set Ubuntu Server Timezone
12. Ubuntu Home Server Timezone

Step 13: Ubuntu Server Drive Partitioning

This is one of the key steps and probably most complicated of all steps. We will have a separate partitioning guide shortly. For now, ensure that you have at least 8GB (headless - no desktop environment) or 10 GB (with desktop environment) of space. In this guide we are going to assume that the homeserver has 2 physical hard disks (sda and sdb). sda is the drive that will be formatted for Ubuntu Server 16.04 installation. sdb is a storage drive containing all media collection (will not be formatted). Choose Manual partitioning method and proceed.

Ubuntu Server Partitioning
13. Server Partitioning

My recommendation is to create a separate /home partition and put everything else under /. The reason I suggest this is that almost all customizations are saved in home partition. They will be saved if you decide to reinstall OS for some reason. Furthermore, if you use AtoMiC ToolKit to setup home server apps such as CouchPotato, SABnzbd, SickBeard, etc. then those apps are installed in /home partition. These will be preserved between reinstall and OS upgrades. If you decide to do this, then I suggest about 10 GB for OS / and the rest of the disk for /home where all your data will be stored. Also create about 2 GB of Swap partition (will be used as backup RAM for server). Once again, all these will be explained in detail in my upcoming partitioning guide.

Step 14: Confirm Partition Scheme

Once you have setup a partitioning scheme, the installer will show you a preview of the partition scheme. Confirm and continue to create the partitions. As explained before, in this example we are creating one primary partition of 10 GB that will contain the OS (/ folder), rest of the space on the hard disk minus ~2 GB for /home partition, and the final ~2 GB for Linux swap partition. This is shown in the picture below.

Ubuntu Home Server Installation - Partition Scheme
14. Ubuntu Server Partitions

In the picture above, /home partition is only 20 GB. In reality, this would be the total hard disk capacity minus space used for / partition and swap partition. Also, second hard disk containing media files would much larger than 5.4 GB shown above. Note that hard disk 1 (sda) with 3 new partitions shows "f" (to be formatted) and hard disk 2 (sdb) with one existing partition shows "K" (to be kept / not to be formatted). Ensure that the drive containing your media files is set to "K" as shown above.

Step 15: Write the Partitions to Disk

Because partitioning is critical, you will be asked one more time to confirm before partitions will be written to the hard disk.

Install Ubuntu Server Xenial - Write Partitions
15. Write Partitions

The above picture shows only 2 partitions (/ and swap). For the partition scheme shown in previous step you will see 3 partition (/, /home, and swap) listed for creation.

Step 16: Base Ubuntu 16.04 Server Installation

After partitioning, the installer continue to install Ubuntu Server 16.04 base system. Nothing to do here than wait for it to complete.

Install Ubuntu Nas Server - Installing Base
16. Installing Base Server

Step 17: Setup HTTP Proxy

In typical Ubuntu Home Server setup, this is generally not needed. So, leave it blank and continue to install Ubuntu 16.04 Server.

Install Ubuntu Home Server - Http Proxy
17. Http Proxy
Recommended HTPC / Home Server Builds:

Step 18: APT Repository Configuration

Ubuntu software are installed from the APT repository. Wait for the installer to configure it.

Install Ubuntu 16.04 Xenial Server - Configuring Apt
18. Configuring Apt Repository

Step 19: Setup Automatic Updates

Ubuntu Server can automatically install updates when they are available. While this can break things sometimes installing just the security updates shouldn't. So I recommend installing security updates automatically on your Ubuntu home server.

Install Ubuntu Xenial Xerus - Automatic Updates
19. Automatic Os Updates

When non-security updates are available, you will see a notification upon login and you can force an update using sudo apt-get upgrade command.

Step 20: Ubuntu Server Tasksel

After partitioning, this is the step that requires most user intervention. You will have to select what services you want to install on your Ubuntu 16.04 Server. "Standard System Utilities" should already be selected. In addition, for a typical Ubuntu homeserver setup, I recommend LAMP server, Samba file server, and OpenSSH server.

Ubuntu Server Edition Installation - Tasksel
20. Install Ubuntu 16.04 Server - Tasksel

LAMP server installs Apache web server, MySQL database server, and PHP. MySQL may be needed for running a dynamic website. But for a home setup it can also allow sharing Kodi database between devices. Samba file server will allow you share files with Windows systems. And OpenSSH will allow you to remotely connect and administer your Ubuntu Home Server through SSH. [Read: 10 best SSH Clients for Windows: free alternatives to PuTTY]

Step 21: Ubuntu Server Installation

Ubuntu Server installer will continue to setup Ubuntu home server packages you selected in Tasksel. Nothing to do here than just wait.

Ubuntu Server 16.04 Xenial Xerus - Installation
21. Ubuntu Server 16.04 Xenial Xerus - Installation

Step 22: MySQL Password

Next, the Ubuntu server installation will proceed ask you for an administrator password for MySQL database. Provide something strong but also something you can remember.

Install Ubuntu Home Server 16.04 Lts - Mysql Password
22. Mysql Admin Password

You will have re-enter the password to confirm. The default administrator username is "root".

Step 23: Ubuntu Server Installation Continues

Once again, nothing much to do here. Let the installation continue.

Install Ubuntu Xenial Server - Installation Continued
23. Installation Continued

Step 24: GRUB Notification

GRUB is the boot menu that is shown immediately after your Ubuntu Server powers on. It shows a list of all OSes installed on the system. It is installed to the hard drive containing the OS. In most cases this is /dev/sda.

Ubuntu Home Server Setup - Grub-Notification
24. Grub Notification

Step 25: Installing GRUB

As explained above, it is safe to install GRUB to /dev/sda. No input needed. Let the installer do its thing.

Setup Ubuntu Home Server - Installing Grub
25. Installing Grub

Step 26: Finishing Ubuntu Server Installation

Again, nothing to do here. Let the installer finish a few things to complete setting up Ubuntu 16.04 LTS server.

Install Ubuntu 16.04 Home Server - Finishing Installation
26. Finishing Ubuntu Server 16.04 Installation

Step 27: Reboot Ubuntu Server

Yah! you are done. After installation completes, hit continue to reboot server.

Install Ubuntu Home Server - Installation Complete
27. Install Ubuntu Home Server - Installation Complete

Step 28: Ubuntu GRUB Menu

As explained above you will see the GRUB menu while booting. Nothing to do here. Your server will automatically boot to Ubuntu, which is the default setting.

Install Ubuntu Home Server 1604 - Grub Menu
28. Ubuntu Grub Menu

Step 29: First Login

When you are presented with the login screen enter the username and password you created earlier in the Ubuntu 16.04 Xenial Xerus installation process. Remember that Linux commandline does not show anything (asterisk) while typing passwords.

Ubuntu Home Server Setup - Login
29. Ubuntu Server First Login

Step 30: Ubuntu Server Headless Commandline

There you go. You should be on your Ubuntu Server commandline after successful login.

Install Ubuntu Home Server - Headless
30. Ubuntu Server Headless

While there are 29 steps to install Ubuntu 16.04 Server, most steps require no interaction from you. The whole installation can be done in less than 30 min. What the whole process in this 5 minute video guide.

Learn to install Ubuntu 16.04 Xenial Xerus LTS Home Server in 5 min

I have previously presented several options for home server operating systems. In my opinion, Ubuntu server is the best Linux distro for home server, period. And LTS release such as 16.04 Xenial Xerus ensures that you are set for 5 years. Once you get a handle of it you will begin to appreciate what it can do for you. If you are not tech savvy or are just feeling a bit lazy today then try our AtoMiC ToolKit to automate installation and management of home server software. Go ahead, install Ubuntu Server 16.04 and begin the journey.

Be the 1 in 200,000. Help us sustain what we do.
25 / 150 by Dec 31, 2024
Join Us (starting from just $1.67/month)

Anand

Anand is a self-learned computer enthusiast, hopeless tinkerer (if it ain't broke, fix it), a part-time blogger, and a Scientist during the day. He has been blogging since 2010 on Linux, Ubuntu, Home/Media/File Servers, Smart Home Automation, and related HOW-TOs.